Owner`s manual

Belt Tension Check – From the belt’s midpoint, a correctly tensioned belt should only have two inches of give.

Keep bystanders and children away from the product during this procedure.

To check, pull the belt upward at its midpoint and measure the distance to the deck. If the distance is more than two

inches, the belt is loose. To tighten, turn both walking belt adjustment bolts clockwise a half turn and check tension

again. Repeat this step if necessary.

Note: Bolts are turned counterclockwise equally to decrease belt tension.

Belt Tension Adjustment – Check the belt tension only when the machine is unplugged. From the belt’s midpoint, a

correctly tensioned belt should only have an inch of give. To check, pull the belt upward at its midpoint and measure

the distance to the deck. If the distance is more than an inch, the belt is loose. To tighten, turn both Walking Belt

Adjustment Bolts clockwise one-half a turn and check tension again. Repeat this step if necessary.

Note: Bolts are turned counterclockwise equally to decrease belt tension.

Heim Joint Inspection and Lubrication

For proper operation of the Treadles, the Heim Joint should be inspected and lubricated with a 3-in-1 oil every six

months. Apply the lubrication oil to all the inner areas of the Heim Joint.

Note: Be sure to place a rag

under the Heim Joint when

applying oil or adjusting it.

Inspect the Heim Jount to

conﬁ rm that the hardware is

secure. If the securing nuts

have become loose, contact

Customer Service for as-

sistance.

Maintenance