Owner`s manual

21
Moving Your Machine
The TreadClimber
®
fi tness machine weighs approximately
163 lbs (74 kg) when fully assembled and requires caution
when being moved. Use the Transport Handle found under the
front of the machine to move it. To get access to the Transport
Handle, turn the Levelers until you have suffi cient clearance
between the machine and fl oor.
Use the transport wheels to roll your fi tness machine to the
new location. Lower your machine slowly into its new location
without injury to your head or fi ngers.
Do not use the uprights, handlebars, or the Console to
lift or move the machine. Injury to you or damage to
the machine can occur.
The machine may be moved by one or more persons depending on their physical abilities and capacities. Make
sure that you and others are all physically fi t and able to move the machine safely.
Place the machine on a clean, hard, level surface, free from unwanted material or other objects that may ham-
per your ability to move freely. A rubber mat should be used below the machine to prevent the release of static
electricity and protect your fl ooring.
For safe storage of the machine, remove the batteries and place the machine in a secure location away from
children and pets.
Be aware that in the normal operation of the machine, treadle movement is mechanically linked to the walking
motion on the belts. When the walk belts are not in motion, the treadles will rest in a fi xed position. In the
event that an object becomes lodged between the treadles, the treadles can be manually moved in one of the
following 2 ways:
a. Push downward on the outside foot rail of the lowest treadle with your foot or hand, and the treadles will
move allowing release of the object.
b. Push down and back on the walk belt of the lowest treadle with your foot or hand, and the treadles will
move allowing release of the object.
Take care not to allow children or pets to play on or around the machine.
Operations