Owner`s manual

32
5. Switch on your machine and start the belts at the slowest speed. Let the belts operate for approximately 15
seconds.
6. Switch off your machine.
7. Take care to clean up any excess lubricant from the Treadles. We also recommend a periodic inspection of the
Treadle surfaces below the belts. If the decks appear worn, contact a TreadClimber
®
Representative (refer to the
Contacts section of this manual).
!
To decrease the possibility of slipping, be sure the Treadle area is free from grease or oil. Clean off any excess
oil from the machine surfaces.
Maintenance