Manual

Troubleshooting
I/0 cables (cables connected
in assembly Step 8)
If LED D is flashing when the belts are turning but belts
stop with err LS or OS displayed, the speed sensor
signal is not reaching the console. This indicates a
problem with the I/0 cables.
Turn off the power switch and unplug the machine.
To reduce the risk of electrical shock or
unsupervised usage of the equipment,
always unplug the power cord from the
wall outlet and/or the machine and wait 5
minutes before cleaning, maintaining or
repairing the machine. Place the power
cord in a secure location.
Inspect connections for signs of visible damage to any
of the I/0 cables. If no damage, check continuity using
a multi-meter. If a multi-meter is not available, contact
customer service for replacement cables and further
assistance.
Owner's Manual 35