Owner`s manual

Walking Belt and Deck Lubrication

The TreadClimber

machine is equipped with a low maintenance deck and belt system. Belt friction can affect the

function and life of the machine. Your TreadClimber

ﬁ tness machine came with a starter supply of lubrication for

the belts.

Lubrication Schedule

User Level Total Workout Hours per Week When to Lubricate

Light less than 3 hours every 3 months

Moderate 3 to 5 hours every 2 months

Heavy 5 or more hours every month

We recommend that you use one of the following:

• Lube-N-Walk

Treadmill Lubrication Kit (available from www.bowflex.com or your local specialty fitness dealer)

• 100% pure silicone, available at most hardware and auto parts stores.

As you use your ﬁ tness machine, the Console will show “LUbE” at set times. This is only a reminder and should

be added to your inspection schedule. Only apply lubricant as necessary. Push the START button to accept the

reminder.

For the best results lubricate the Treadles periodically with a silicone lubricant, using the following instructions:

1. Unplug the machine fully from the wall outlet, and remove the power cord from the machine. Place the power

cord in a secure location.

2. Carefully lift each belt and apply silicone lubricant in the center of the Treadle deck along the entire reachable

length of the deck. Apply 0.5 to 1.5 oz. of the lubricant on the deck underneath each belt.

NOTICE: Always use a 100% pure silicone lubricant. Do not use a degreaser like WD-40

or a

petroleum based product as this could seriously impact performance.

Note: The Walking Belts may need to be loosened to allow for access during lubrication. Consult the

“Adjusting the Walking Belts” procedure if necessary.

3. Connect the power cord back into the machine and then into the wall outlet.

4. Stay to one side of your machine.

Maintenance