Owner`s manual

27
Console Service / Setup Mode
The Console has a Service / Setup Mode. Some options in the Service / Setup Mode can be adjusted to your
preferences, but most are helpful for service of the machine. To access the Service / Setup Mode, hold down the
Increase and Decrease buttons for 2 seconds.
Order Dis-
play
Option Description
1 Unit Units Select your preferred unit of measurement; “Lb” = English Imperial, “Si”
= metric
2 brt Brightness Control the contrast level of the Console; “8” = maximum intensity, “1” =
minimum
3 LOG Error Log * Displays error codes, starting with the most recent
4 Con Console Version
*
Displays the software version
5 dr Drive Version * Displays the drive version
6 HrS Device Usage Displays total number of hours and minutes used
7 diSt Device Mileage Displays total mileage
8 HiSt Motor Current
History *
Displays the average motor current for the current maintenance interval.
Push the Decrease button to view the averages of previous intervals.
9 Hd Hardware Type * Displays the hardware type
10 Curr Motor Current * Displays the current of the motor
11 CoAS Coast Time * A test to see how long until the belts stop.
12 LooP Loop Back * A test to see if the Console is receiving data.
13 CSn Console Serial
Number
Displays the serial number of the Console across all the displays
14 dSn Drive Serial
Number *
Displays the serial number of the Motor Control Board across all the
displays
15 dES Drive Error
Statistics *
Displays the latest hard error statistics for the Motor Control Board. Push
the Increase and Decrease buttons to view all error statistics.
* for Service Technicians
Use the Increase and Decrease buttons to cycle through the Options. To change the value of an Option, push
START and use the Increase and Decrease buttons to select the desired value. Push START to assign the new
value to the Option.
Push STOP to exit an Option and the Service / Setup Mode.
Operations