Service manual

BDS552 Chrome Stand and BDS1642 2-in-1

STAND- Assembly Troubleshooting

Problem:

The Towel Bar cannot be attached to both Dumbell Platforms.

See Figures 1A and 1B.

Solution:

The Left and Right Dumbbell Platforms are installed on the

wrong Legs, and need to be switched. Please refer to the Parts

List item numbers and Exploded View in this service manual.

Detailed assembly instructions are provided in the Assembly

Manual.

Tools:

• 7/32” Hex Key

• 9/16” Socket

• 9/16” Wrench or Adjustable Wrench

Steps:

1-1 Unscrew the Towel Bar (#9) from the Dumbbell Platform

(#7 / #8). Set the hardware safely aside.

1-2 Unscrew the Dumbbell Platforms (#7 and #8) from the

stand Legs (#1). Set the hardware for each Platform

safely aside.

1-3 Attach the Right Platform (#7) to the right Leg (#1) and the

Left Platform (#8) to the left Leg (#1) using the hardware

from Step 1-2.

Note: When you reinstall the Dumbbell Platforms on the stand,

check the following:

• The Dumbell Platforms should be installed so that the

screw holes for attaching the Towel Bar are closer to

the upper end of each platform. See Figure 2.

Figure 1B – Close-up

Figure 1A – Incorrect Assembly

TROUBLESHOOTING GUIDE