Specifications

Assembly / Owner’s Manual

TheConsoleSetupModeletsyoucontrolthesoundsettings,orseemaintenancestatistics(TotalRunHoursandSoftwareVersion).

1. Push and hold down the Burn Rate/Increase and PAUSE/END buttons for 3 seconds while in the Power-Up Mode to go into the Console Setup

Mode.

Note:PushPAUSE/ENDtoexittheConsoleSetupModeandreturntothePower-UpModescreen.

2. The Console display shows the Sound Settings prompt with the current setting. Push the Burn Rate/Increase or Burn Rate/Decrease buttons to

change between the settings of “OFF” and “1” through “7”. A setting of 7 is the loudest sound level

3. Push START/ENTER to set.

4. The Console display shows the TOTAL RUN HOURS for the machine.

5. Forthenextprompt,pushtheSTART/ENTERbutton.

6. TheConsoledisplayshowstheSoftwareVersionprompt.

7. PushtheSTART/ENTERbuttontoexittheConsoleSetupMode..

The Console will display the Power-Up Mode screen.

Console Setup Mode