User Manual

Assembly / Owner’s Manual

The Console Setup Mode lets you control the sound settings, or see maintenance statistics (Total Run Hours and Software Version).

1. PushandholddowntheBurnRate/IncreaseandPAUSE/ENDbuttonsfor3secondswhileinthePower-UpModetogointotheConsoleSetup

Mode.

Note: PushPAUSE/ENDtoexittheConsoleSetupModeandreturntothePower-UpModescreen.

2. The Console display shows the Sound Settings prompt with the current setting. Push the Burn Rate/Increase or Burn Rate/Decrease buttons to

change between the settings of “OFF” and “1” through “7”. A setting of 7 is the loudest sound level.

3. Push ENTER to set.

4. The Console display shows the TOTAL RUN HOURS for the machine.

5. Forthenextprompt,pushtheENTERbutton.

6. TheConsoledisplayshowstheSoftwareVersionprompt.

7. PushtheENTERbuttontoexittheConsoleSetupMode.

 TheConsolewilldisplaythePower-UpModescreen.

Console Setup Mode