Owner's Manual

8
Step 10 Optional Leg Extension Assembly
Parts:
• Leg Extension Backbone
• 2 Chrome Tubes
• 4 Foam Rollers
• 4 End Caps
Tool:
Rubber Mallet
10-1
Insert Chrome Tubes through
th
e upper hole and one of
th
e lower holes in the Leg
Extension. (Select hole for
your
comfort level.)
10-2 Slide Foam Rollers onto the
Chrome Tubes and secure
with
end caps. A rubber
mallet may be needed to
secure th
e end caps.
NOTE: The Leg Extension may be adjusted
during workou
t to best suit your height
an
d personal preferences.
Assembly Guide
Step 9 Seat Assembly
Parts:
• Seat Backbone
• Seat Bottom
Hardware:
• 4 Button Head Screws (5/16" X 3/4")
• 4 Washers (5/16")
Tool:
3/16" Hex Wrench
9-1
Install the Seat Backbone to the
underside
of the Seat Pad using
screws and washers as shown.
If you did not purchase the Optional Leg Extension,
skip steps 10 and 11 and proceed to Step 12
.
Button He
ad
Screws
Flat
Washers
Se
at Backbone
Seat Bott
om
Leg Extension
Backbone
End Caps
Foam Roll
e
rs
Chrome Tubes