Owner's Manual

Bowflex Xtreme
®
SE Assembly Manual
15
Chest Exercises
Leg and Squat Exercises
Abdominal Exercises
Lat Pulldown Exercises
Assembly Guide
Step 17 Tighten Hardware
17-1 Carefully go over the entire Bowflex Xtreme® SE home gym and tighten
all hardware before proceeding to the next step. Pay close attention to the
hardware installed in Steps 1, 3, 4, and 6.
Step 18 Connecting Cables
Parts:
Completed Bowflex Xtreme® SE home gym
Tool: Scissors or other cutting tool (not included)
18-1
Remove the wrapping from around the coiled cable and pulley
attached to the Right and Left Frame Rails.
18-2 Remove the wrapping from around the coiled cable and pulley
attached to the left and right side of the lat tower.
18-3 Attach the cable to the home gym following the routing for the
various exercise positions.
NOTE: As you use your home gym, you will connect the cables and
pulleys in a variety of ways to perform the exercises. Refer
to the Owner’s Manual for information on using the Bowflex
Xtreme® SE home gym..