Owner's Manual

10
Bowflex Xtreme
®
SE Assembly Manual
Step 10 Leg Extension Assembly
Parts:
• Leg Extension Backbone
• 2 Chrome Tubes
• 4 Foam Rollers
• 4 End Caps
Tool: Rubber Mallet
10 -1
Insert Chrome Tubes through
the upper hole and one of the
lower holes in the Leg Extension.
(Select hole for your comfort
level.)
10-2 Slide Foam Rollers onto the
Chrome Tubes and secure with
end caps. A rubber mallet may
be needed to secure the end
caps.
NOTE: The Leg Extension may be adjusted
during workout to best suit your height
and personal preferences.
Step 9 Seat Assembly
Parts:
• Seat Backbone
• Seat Bottom
Hardware:
• 4 Button Head Screws (5/16" X 3/4")
• 4 Washers (5/16")
Tool: 3/16" Hex Wrench
9-1
Install the Seat Backbone to the
underside of the Seat Pad using screws
and washers as shown.
Button Head
Screws
Flat Washers
Seat Backbone
Seat Bottom
Leg Extension
Backbone
End Caps
Foam Rollers
Chrome Tubes
Assembly Guide