Owner's Manual

8
Bowflex Xtreme
®
SE Assembly Manual
Step 6 Install Pulley
Arms
Parts:
• Right Pulley Arm
• Left Pulley Arm
• Main Assembly
Hardware:
• 4 Washers (3/8")
• 4 Button Head Screws
(3/8" X 3/4")
Tools: 7/32" Hex Wrench
6-1
Slide Left and Right Pulley Arms onto
the connectors on the base frame as
shown.
6-2 Secure Pulley Arms to Base Frame
using screws and washers as shown.
Finger tighten screws
at this time.
Step 5 Install Squat Pulley Frame
Parts:
• Squat Pulley Frame Assembly
• Main Assembly
Hardware:
• 1 Button Head Screw (3/8" X 5")
• 1 Nylock Nut (3/8")
• 2 Button Head Screws (3/8" X 1")
• 4 Washers (3/8")
Tools: 7/32" Hex Wrench & Adjustable
or Socket Wrench
5-1
Place the Squat Pulley Frame behind the Seat
Support Rail and align the top screw holes.
Secure using a 3/8" X 5" screw, washer and nut in
the top hole as shown.
5-2 Install screws and washers into the bottom holes
of the Squat Pulley Frame as shown.
Button
Head
Screw
Flat
Washers
Nylock Nut
Squat Pulley
Frame
Flat
Washers
Button Head
Screws
Squat pulley frame not shown for clarity.
Squat pulley frame not shown for clarity.
Base Frame &
Lower Lat Tower
Assembly
Flat Washers
Button Head
Screw
Button
Head Screw
Right Pulley Arm
Left Pulley Arm
Button Head
Screws
Washers
Assembly Guide