Owner's Manual

12
Bowflex Xtreme
®
2 SE Assembly Manual
Step 12 Install Seat Assembly
Parts:
• Seat Assembly
• Seat Locking Pin
• Main Assembly
12-1 Align the top two hooks on the Seat
Backbone with one of the pairs of pins on
the Seat Support Rail, as shown in Detail
12a.
12-2 Tip seat front up and slide
hooks onto pins. Rotate seat down and back
to use.
12-3 Slide the Seat Locking Pin through the holes
in the Seat Backbone hooks to secure the
seat assembly on the Seat Support Rail as
shown in Figure 12b.
Note: Reverse procedure to remove seat.
Seat
Backbone
Seat Support
Rail
Assembly Guide
Seat Locking
Pin
Seat Locking
Pin installed
Detail 12b - Back View
Detail 12a