Owner's Manual

Bowflex Xtreme
®
2 SE Assembly Manual
11
Step 10 Install Leg Extension
Assembly
Parts:
• Leg Extension Assembly
• Lock Knob
• Seat Assembly
10 -1
Insert Leg Extension Backbone
into open end of Seat Backbone
as shown.
10-2 Align one hole of the Leg
Extension with the hole in the
Seat Backbone to fit your height
and secure with the Lock Knob
as shown.
Lock Knob
Seat
Backbone
Leg
Extension
Backbone
Assembly Guide
Step 11 Install Seat Back Pad
Note: The back of the Seat Back Pad has two pairs
of holes. Select the appropriate
set based on your height.
Parts:
• Seat Back Pad
• Main Assembly
Hardware:
• 2 Button Head Screws (5/16" X 2 1/2")
• 2 Washers (5/16")
Tool: 3/16" Hex Wrench
11-1 Position Seat Back Pad against the
Seat Support Rail and align the
screw holes for your height with
those on the Seat Support Rail.
11-2 Secure Seat Back Pad to the Seat Support
Rail using screws and
washers as shown.
Button Head Screw
Washer
Seat Back
Seat Support
Rail
Seat Back
Seat Support Rail