Owner's Manual

10
Bowflex Xtreme
®
2 SE Assembly Manual
Step 9 Leg Extension Assembly
Parts:
• Leg Extension Backbone
• 2 Chrome Tubes
• 4 Foam Rollers
• 4 End Caps
Tool : Rubber Mallet
9-1
Insert Chrome Tubes through the
upper hole and one of the lower
holes in the Leg Extension. (Select
hole for your comfort level.)
9-2 Slide Foam Rollers onto the
Chrome Tubes and secure with
end caps. A rubber mallet may be
needed to secure the end caps.
Note: The Leg Extension may be adjusted
during workout to best suit your height
and personal preferences.
Step 8 Seat Assembly
Parts:
• Seat Backbone
• Seat Bottom
Hardware:
• 4 Button Head Screws (5/16" X 3/4")
• 4 Washers (5/16")
Tool: 3/16" Hex Wrench
8-1
Install the Seat Backbone to the
underside of the Seat Pad using screws
and washers as shown.
Button Head
Screws
Flat Washers
Seat Backbone
Seat Bottom
Leg Extension
Backbone
End Caps
Foam Rollers
Chrome Tubes
Assembly Guide
Lock Knob