Owner's Manual
6
Bowflex Xtreme
®
2 SE Assembly Manual
Assembly Guide
Step 3 Install Seat Support Rail
Parts:
• Seat Support Rail (4)
• Base Frame Assembly
Hardware:
• 2 Button Head Screws 3/8” X 3/4” (I)
• 2 Flat Washers 3/8” (B)
Tool: 7/32” Hex Wrench
3-1
Slide the bottom of the Seat Support Rail onto
the Base Frame connector as shown.
3-2 Slide the top of the Seat Support Rail onto
the Lower Lat Tower Assembly connector as
shown. Secure using screws and washers as
shown.
Finger tighten screws at this time.
B
I
4