Owner's Manual

18
Bowflex Xtreme
®
2 SE Assembly Manual
Assembly Guide
Figure 18b - Detail
Step 18b Cable and Pulley Routing –
Connect Cable End Stop Ball with Core
Step 18c Cable and Pulley Routing
Connect Rod Cables through Left (3) Floating
and Lat Tower Pulleys
18-4 Repeat with Left Rod Cable and (3) and (8)
Floating Pulleys, as shown in Figure 18c.
Note: Once the Cable End Stop Balls are attached,
hook each Rod Hook onto the Lat Pulley
Housing as shown in Figure 18d.
5
4
3
2
Figure 18d - Rod Hooks Storage on Lat Pulley
Housing
Figure 18c