Owner's Manual

Bowflex Xtreme
®
2 SE Assembly Manual
11
Step 11 Install Seat Assembly
Parts:
• Seat Assembly
• Seat Locking Pin (P)
• Main Assembly
11-1 Align the top two hooks on the Seat
Backbone (17) with one of the pairs of
pins on the Seat Support Rail (4), as
shown in Detail 11a.
11-2 Tip seat front up and slide
hooks onto pins. Rotate seat down and back
to use.
11- 3 Slide the Seat Locking Pin through the holes
in the Seat Backbone hooks to secure the
seat assembly on the Seat Support Rail as
shown in Figure 11b.
Note: Reverse procedure to remove seat.
17
4
P
Assembly Guide
P
Detail 11b - Back View
Detail 11a