Owner's Manual

Bowflex Xtreme
®
2 SE Assembly Manual
9
Step 8 Leg Extension Assembly
Parts:
• Leg Extension Backbone (23)
• 2 Chrome Tubes (25)
• 4 Foam Rollers (26)
• 4 End Caps (27)
Tool : Rubber Mallet
8-1
Insert Chrome Tubes through the
upper hole and one of the lower
holes in the Leg Extension. (Select
hole for your comfort level.)
8-2 Slide Foam Rollers onto the
Chrome Tubes and secure with
end caps. A rubber mallet may be
needed to secure the end caps.
Note: The Leg Extension may be adjusted
during workout to best suit your height
and personal preferences.
Step 7 Seat Assembly
Parts:
• Seat Backbone (17)
• Seat Bottom (18)
Hardware:
• 4 Button Head Screws 5/16" X 3/4" (L)
• 4 Washers 5/16" (E)
Tool: 3/16" Hex Wrench
7-1
Install the Seat Backbone to the
underside of the Seat Pad using screws
and washers as shown.
Assembly Guide
18
17
E
L
27
26
25
23
24