Owner's Manual

User’s Manual
4
Parts
Item Qty Description
1 2 Handle
2 1 Pad Assembly
3 2 Leg Assembly *
4 1 Shaft, Pad
Hardware
Item Qty Description
A 4 Washer, Large Plastic
B 2 Washer, Plastic
C 2 Washer, Black
D 2 Cotter Pin
E 2 Cover
A B C D E
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level
surface. Allow a workout area of a minimum 87.6” (222.5 cm) x 59.9” (152.1 cm) plus adequate room for the length of the user when in
use.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the “Important Safety Instructions” before assembly.
• Collect all the pieces necessary for each assembly step.
• Turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
Before Assembly / Parts / Hardware
2
1
3
X2
4
* Be sure the Resistance Cables
and End Caps are loose and not
secure before assembly.