Owner's Manual

User’s Manual

4. If necessary, repeat the procedure on the other End Cap of the

Leg Assembly.

5. Perform the same adjustments to the End Caps on the other

Leg Assembly. Be sure the Cable settings match between the

Leg Assemblies.

Maintenance

Read all maintenance instructions fully before you start any repair

work. In some conditions, an assistant is required to do the neces-

sary tasks.

Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular maintenance

is done. Worn or damaged components must be repaired or replaced immediately. Only manufacturer supplied components can

be used to maintain and repair the equipment.

Daily: Before each use, examine the exercise device for loose, broken, damaged, or worn parts. Do not use if found

in this condition. Repair or replace all parts at rst sign of wear or damage. After each workout, use a clean,

dry cloth to wipe the device.

Weekly: Clean the device fully with a clean cloth lightly dampened with warm water and a small amount of mild soap.

Wipe dry with a separate cloth.

Note: Do not use petroleum based products or cleansers containing enzymes.

Monthly or after 20

hours:

Make sure all parts are tight and secure. Tighten as necessary.

NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner.

Maintenance Parts

A Cover

B Leg, Outer

C Wheel

D Leg, Inner

E Lock Arm

F End Cap

G Resistance Cable

H Pad Assembly

I Handle Knob

J Handle

K Locking Bracket

L Pad Shaft