Owner's Manual

User’s Manual
10
A
B
D
C
E
G
F
C
C
J
H
I
Locking the Device / Storage
When the device needs to be stable for a workout or is not in use, be sure to secure the Leg Assembly
Lock on each Leg Assembly.
To prevent unsupervised operation of the device always secure the Leg Assemblies with the Leg
Assembly Locks. Place the device in a secure location from children and pets.
To engage, release the Leg Assembly Lock from the Upper Locking Bracket and pivot it down to the Lower
Locking Bracket. Snap it into place and be sure it is secure. Repeat on the other Leg Assembly.
Be sure the Leg Assembly Locks are secure and in place before beginning a workout.
To disengage the Leg Assembly Lock, pull up on it near the Locking Bracket. Pivot the Leg Assembly Lock
up and secure it to the Upper Locking Bracket.
Adjusting the End Caps
The End Caps must be secure in a Slot before any workout. The End Caps should be set at a level that is helpful to your workout. The
settings of each Leg Assembly must match the other for the device to operate correctly.
1. Lock the Leg Assemblies.
2. Grasp the End Cap and remove it from the Slot.
3. Move the End Cap to the desired Slot and secure it.
Correctly adjust and safely engage all Positional Adjustment Devices.
Features / Operations / Maintenance
A Pad
B Leg Assembly
C Locking Bracket, Lower
D Handle
E Wheel
F Slot
G End Cap
H Resistance Cable
I Locking Bracket, Upper
J Leg Assembly Lock