Owner's Manual

38
Cable Installation STEP 4
a. UncoiltheCablefromLowerPulleyandremovethe
BallStop.(See Step 1/Figure A)
b. InBox4,locateaSinglePulleyAssemblywithone
Cheek.WraptheCableunderthePulleyandfeedthe
CablethroughtheholeintheRodBox.(See Figure A)
c. InstalltheSinglePulley(See Figure B) making sure
thecableisbetweenthePulleyandthesmallMetal
PostonthePulleyBracket.
(See Top View of Angled Pulley)
d. FeedtheCablethroughthelowerhalfoftheFloating
PulleyAssembly.
Tool:
 •HexKey(7/32”)
Figure A
Figure B
Top View of
Angled Pulley
Pulley Bracket
Metal Post
Cable
Pulley
Floating Pulley
Assembly
Single Pulley
Rod Box
Lower Pulley
Installing Your Bowflex Ultimate
®
2 Cables