Owner's Manual

ManualsBrandsBowflex ManualsHome GymsBowflex Bowflex PR3000 (2008 model)

Nautilus

Bowflex

Schwinn

Fitness StairMaster

Universal

Nautilus Institute

Assembly Manual

PR3000 Home Gym

001-7279-063008A

Summary of content (24 pages)

PAGE 1
® ® PR3000 Home Gym Assembly Manual Nautilus® Bowflex® 001-7279-063008A Schwinn® Fitness StairMaster® Universal® Nautilus Institute®
PAGE 2
Table of Contents Attach the Seat Bottom to the Seat Backbone.......... 11 Attach Leg Extension Assembly.................................... 12 Attach Seat Back............................................................. 13 Attach the Lat Crossbar with Pulleys ............................................14 Attach the Rear Lat Cross Bar....................................... 15 Attach the Upper Lat Tower Assembly........................ 16 Attach the Lat Pulley Housing.........................
PAGE 3
Important Safety Instructions This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Before using this equipment, obey the following warnings Read and understand all warnings on this machine. Carefully read and understand the Assembly Manual. • Keep bystanders and children away from the product you are assembling at all times. • Do not assemble equipment in a wet or damp location.
PAGE 4
Hardware (Hardware not actual size) Qty. 19 Item #1 3/8”x 3/4” Hex Head Bolt Qty. 6 Qty. 2 Item #2 5/16”x 2 1/2” Hex Head Bolt Qty. 2 Qty. 3 Qty. 4 Qty. 31 Qty. 3 Qty. 6 Qty. 4 Qty. 6 Qty. 4 Item #3 1/4” Washer Qty. 2 Item #4 1/2” Washer Item #5 3/8” Washer Item #6 #10 x 1” Phillips Head Screw Item #7 3/8” Nylock Nut Item #12 Ball Stop Item #13 3/8” x 3” Hex Head Bolt Item #14 1/2” x 5 1/4” Hex Head Bolt Qty. 4 Item #15 5/16” x 3/4” Hex Head Bolt Qty.
PAGE 5
Parts 47 51 44 52 41 42 26 43 25 24 49 46 40 27 48 36 31 50 45 35 33 34 30 32 22 23 38 37 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Qty. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 28 20 39 Item # 29 21 19 Description Item # Qty.
PAGE 6
Assembly Step 1: Assemble the Base Parts • Base Platform (#19) • Right Frame Rail (#20) • Left Frame Rail (#21) • Rear Cross Bar (#22) • Central Support (#23) Hardware • (4) 3/8” x 3/4” Hex Head Bolts (#1) • (4) 3/8” x 2 3/4” Hex Head Bolts (#16) • (12) 3/8” Washers (#5) • (4) 3/8” Nylock Nuts (#7) Tools • Adjustable Wrench (not included) 1-1 Put the Base Assembly parts on the floor.
PAGE 7
Assembly Step 2: Attach the Rod Pack Parts • Rod Pack (#29) • Lower Lat Tower (#30) • Rod Pack Strap (#41) Hardware • (3) #10 x 1” Phillips Head Screws (#6) • (3) 1/4” Washers (#3) Tools • Phillips Head Screw Driver (not included) 2-1 Slide the Rod Pack into the Lower Lat Tower. 2-2 Install and tighten the hardware.
PAGE 8
Assembly Step 3: Attach the Lower Lat Assembly to the Base Assembly Parts • Competed Assembly (from step 1) • Lower Lat Tower Assembly (from step 2) Hardware • (2) 3/8” x 3/4” Hex Head Bolts (#1) • (2) 3/8” Washers (#5) Tools • Adjustable Wrench (not included) 3-1 Put the Lower Lat Tower Assembly onto the Completed Assembly. 3-2 Install and tighten the hardware.
PAGE 9
Assembly Step 4: Attach the Seat Support Rail Parts • Seat Support Rail (#34) • Completed Assembly (from step 3) Hardware • (4) 3/8” x 3/4” Hex Head Bolts (#1) • (4) 3/8” Washers (#5) Tools • Adjustable Wrench (not included) 4-1 Attach the Seat Support Rail to the Lower Lat Tower. 4-2 Install and tighten the hardware.
PAGE 10
Assembly Step 5: Attach the Pulley Arms Parts • Right Pulley Arm (#27) • Left Pulley Arm (#28) • Completed Assembly (from step 4) Hardware • (4) 3/8” x 3/4” Hex Head Bolts (#1) • (4) 3/8” Washers (#5) • (2) 1/2” x 9 1/2” Threaded Studs (#11) • (4) 1/2” Wide Washers (#8) • (4) 1/2” Nylock Nuts (#9) Tools • (2) Adjustable Wrenches (not included) 5-1 Attach the the Right and Left Pulley Arms to the Completed Assembly. 5-2 Install and tighten the hardware.
PAGE 11
Assembly Step 6: Attach the Seat Bottom to the Seat Backbone Parts • Seat Bottom (#33) • Seat Backbone (#32) Hardware • (4) 5/16” x 3/4” Hex Head Bolts (#15) • (4) 5/16” Washers (#17) Tools • Adjustable Wrench (not included) 6-1 Attach the Seat Bottom to the Seat Backbone. 6-2 Install and tighten the hardware.
PAGE 12
Assembly Step 7: Attach the Leg Extension Assembly Parts • Leg Extension Assembly (#37) • Leg Extension Lock Pin (#49) • Seat Bottom Assembly (from step 6) 7-1 Attach the Leg Extension Assembly to the Seat Bottom Assembly with the Leg Extension Lock Pin.
PAGE 13
Assembly Step 8: Attach the Seat Back Parts • Seat Back (#31) • Completed Assembly (from step 5) Hardware • (2) 5/16” x 2 1/2” Hex Head Bolts (#2) • (2) 5/16” Washers (#17) Tools • Adjustable Wrench (not included) 8-1 Attach the Seat back to the Seat Support Rail. 8-2 Install and tighten the hardware.
PAGE 14
Assembly Step 9: Attach the Lat Crossbar with Pulleys to the Upper Lat Tower Parts • Lat Crossbar with Pulleys (#24) • Upper Lat Tower (#26) Hardware • (2) 3/8” x 3” Hex Head Bolts (#13) • (4) 3/8” Washers (#5) • (2) 3/8” Nylock Nuts (#7) Tools • (2) Adjustable Wrenches (not included) 9-1 Attach the Lat Crossbar with Pulleys to the Upper Lat Tower. 9-2 Install and tighten the hardware.
PAGE 15
Assembly Step 10: Attach the Rear Lat Cross Bar Parts • Rear Lat Cross Bar (#25) • Upper Lat Tower Assembly (from step 9) Hardware • (2) 1/2” x 5 1/4” Hex Head Bolts (#14) • (4) 1/2” Washers (#4) • (2) 1/2” Nylock Nuts (#9) Tools • (2) Adjustable Wrenches (not included) 10-1 Attach the Rear Lat Cross Bar to the Upper Lat Tower Assembly. 10-2 Install hardware, but do not tighten.
PAGE 16
Assembly Step 11: Attach the Upper Lat Tower Assembly to the Base Assembly Parts • Completed Assembly (from step 8) Hardware • (2) 3/8” x 3/4” Hex Head Bolts (#1) • (2) 3/8” Washers (#5) Tools • Adjustable Wrench (not included) 11-1 Attach the Upper Lat Tower Assembly to the Base Assembly. 11-2 Install and tighten the hardware.
PAGE 17
Assembly Step 12: Attach the Lat Pulley Housing Parts • Lat Pulley Housing (#36) • Completed Assembly (from step 11) Hardware • (3) 3/8” x 3/4” Hex Head Bolts (#1) • (3) 3/8” Washers (#5) Tools • Adjustable Wrench (not included) 12-1 Attach the Lat Pulley Housing to the Lat Tower. Note: Rod Pack removed from illustration for clarity.
PAGE 18
Assembly Step 13: Cable and Pulley Routing the Rear Pulleys Parts • Completed Assembly (from step 12) Tools • Adjustable Wrench (not included) 13-1 Remove the 3/8” x 4 1/2” Hex Head Bolt and the 3/8” Washer in the center of the Lat Pulley Housing. 13-2 Remove the two pulley wheels from the Lat Pulley Housing. 13-3 Unwrap the Right Pulley Cable from the Right Frame Rail and thread it under and then over one of the pulley wheels. Pinch the Right Pulley Cable to the pulley wheel until installed.
PAGE 19
Assembly Step 14: Connect the Rod Cables through the Right Floating and Lat Tower Pulleys 14-1 Put the right cable that runs through the Lat Pulley Housing through the Floating Pulley (A). 14-2 Pull the same cable through the Pulley on the Rear Lat Cross Bar (B) and then through the Pulley on the Front Lat Cross Bar (C). 14-3 Put the cable end through the Cable End Ball Stop (D). 14-4 Attach the Cable Core (E) to keep the cable from falling out of the pulleys.
PAGE 20
Assembly Step 15: Connect the Right Squat Cable through the Floating and Main Assembly Pulleys 15-1 Unwrap the Right Squat Cable from the Pulley on the front of the Base. 15-2 Put the cable under the cable shroud and under and through the Rear Cross Bar Pulley. Follow the arrows. 15-3 Put the cable down through the Inner Right Frame Rail Pulley and up through the Right Pulley Arm Pulley. 15-4 Put the cable end through the Cable End Ball Stop (A).
PAGE 21
Assembly Step 16: Leg Press Extension Cable Routing Parts • (3) Snap Hooks (#46) • (2) Leg Press Extension Cables (#45) 16-1 Attach one set of snap hooks onto the left and right squat cables. 16-2 Attach the Leg Press Extension Cables. 16-3 Attach a snap hook to the Leg Extension Assembly and connect the Leg Press Extension Cables. 46 45 46 Final Inspection Inspect your machine to ensure that all fasteners are tight and components are properly assembled.
PAGE 22
Assembly Manual
PAGE 23
Contacts UNITED STATES INTERNATIONAL CUSTOMER SERVICE email customerservice@nautilus.com For technical assistance and a list of distributors in your area, please call or fax one of the following numbers. TECHNICAL/CUSTOMER SERVICE Tel: (800) NAUTILUS, (800-628-8458) Fax: (877) 686-6466 E-mail: cstech@nautilus.com INTERNATIONAL CUSTOMER SERVICE Nautilus International S.A. Rue Jean Prouvé 1762 Givisiez / Switzerland Tel: + 41 26 460 77 77 Fax: + 41 26 460 77 70 E-mail: technics@nautilus.
PAGE 24
Printed in China ©2008. Nautilus, Inc. All rights reserved. Nautilus, the Nautilus Logo, Universal, the Universal Logo, Bowflex, the Bowflex logo, Power Rod, StairMaster and Nautilus Institute are either registered trademarks or trademarks of Nautilus, Inc. Schwinn is a registered trademark. All other trademarks are owned by their respective companies. Nautilus, Inc., World Headquarters, 16400 SE Nautilus Drive, Vancouver, WA 98683 1-800-NAUTILUS www.nautilus.