Owner's Manual

STEP 8
Parts:
• Upper Lat Tower
• Lat Tower Cross Bar w/Pulleys & Cables
Tool:
• Hex Key (7/32”)
8-1 Place the Upper Lat Tower against the
Lat Cross Bar.
8-2 Install and completely tighten the hardware.
8-3 DO NOT UNWRAP THE CABLES FROM
THE PULLEYS.
Seat Rail
Assembly
Washer
Button Head
Screw
Nylock Nut
Base
Assembly
Threaded Knob
Washer
Button Head
Screw
Upper Lat
Tower
Lat Cross Bar
w/Pulleys &
Cables
2 Washers (3/8”) 1 Nylock Nut (3/8”)
2 Washers (3/8”)
1 Button Head Screw (3/8” X 4.5”)
Washer
2 Button Head Screws (3/8” X 2.25”)
Hardware (1:1):
Hardware (1:1):
STEP 7
Parts:
• Seat Rail Assembly
(from Step 6)
• Base Assembly
(from Step 3)
• Threaded Knob
Tools:
• Hex Key (7/32”)
• Wrench (9/16”)
- or Adjustable Wrench
7-1 Remove tie wrap holding the Seat Rail
pivot bushings.
7-2 Place the Seat Rail Assembly under the
Base Assembly.
7-3 Install hardware and tighten so the Seat Rail pivots freely.
7-4 Install the Threaded Knob.
Assembling Your Bowflex
®
Motivator
®
2 Home Gym
A7
A6
A7
Assembling Your Bowflex
®
Motivator
®
2 Home Gym
Assembling Your Bowflex
®
Motivator
®
2 Home Gym