The Bowflex Motivator 2 Home Gym Assembly Instructions ® WWW BOWFLEX COM 51516 Rev B (07/2005) ®
Get To Know Your Bowflex® Motivator® 2 Home Gym Congratulations Congratulations on your commitment to improving your health and fitness! With the Bowflex® Motivator® 2 home gym, you have everything you need to exceed all of your physical fitness, strength and health expectations! The Bowflex® Motivator® 2 home gym’s exceptional resistance and quality is unmatched by any other single piece of home fitness equipment available.
Parts List & Tools You Will Need Parts List* Item #: Qty: 1 1 2 1 3 1 4 1 5 1 6 1 7 2 8 1 9 1 10 1 11 1 12 1 13 1 14 2 15 1 16 1 17 4 18 4 19 1 20 2 21 1 Tools You Will Need Description: Lower Lat Tower Seat Rail w/Seat Bracket Base Platform Chest Bar w/Pulleys & Cables Upper Lat Tower Lat Cross Bar w/Pulleys & Cables Hand Grip w/Ankle Cuff 50” Lat Bar Seat Cushion Leg Extension w/Cable Bench Cushion Leg Extension
Hardware Guide (1:1 scale) Item #: A 8 Qty: Descr: Button Head Screw (3/8” X .75”) Item #: C 2 Qty: Descr: Button Head Screw (3/8” X 2.75”) Item #: D 2 Qty: Descr: Button Head Screw (3/8” X 3”) Item #: E Qty: 2 Descr: Button Head Screw (3/8” X 4”) Item #: F Qty: 1 Descr: Button Head Screw (3/8” X 4.5”) Item #: G 2 Qty: Descr: Button Head Screw (3/8” X 5”) Item #: B 2 Qty: Descr: Button Head Screw (3/8” X 2.25”) Item #: H 8 Qty: Descr: Button Head Screw (5/16” X .
Assembling Your Bowflex® Motivator® 2 Home Gym STEP 1 Parts: • Base Platform • Lower Lat Tower Tool: • Hex Key (7/32”) Lower Lat Tower 1-1 S ecure the Lower Lat Tower to the Base Platform. Button Head Screw 1-2 Donot completely tighten hardware. Washer Hardware (1:1): 2 Button Head Screws (3/8” X .
Assembling Your Bowflex® Motivator® 2 Home Gym Button Head Screw STEP 3 Parts: • Base Assembly (from Step 2) • Chest Bar w/Pulleys & Cables Washer Washer Tools: • Hex Key (7/32”) • Wrench (9/16”) - or Adjustable Wrench 3-1 P lace the Chest Bar against the Base Assembly. Nylock Nut Base Assembly Chest Bar w/Pulleys & Cables 3-2 Install and completely tighten the hardware. 3-3 Donot unwrap the Cables from the Pulleys.
Assembling Your Bowflex® Motivator® 2 Home Gym STEP 5 Parts: • Leg Extension • Leg Extension Cross Tube Leg Extension Tools: • Hex Key (7/32”) • Wrench (9/16”) - or Adjustable Wrench Nylock Nut 5-1 P lace the Leg Extension over the Leg Extension Tube. Button Head Screw 5-2 Install and completely tighten the hardware. Washer 5-3 Donot unwrap the Cables from the Pulley.
Assembling Your Bowflex® Motivator® 2 Home Gym STEP 7 Threaded Knob Parts: • Seat Rail Assembly (from Step 6) • Base Assembly (from Step 3) • Threaded Knob Button Head Screw Tools: • Hex Key (7/32”) • Wrench (9/16”) - or Adjustable Wrench Seat Rail Assembly Washer Washer Nylock Nut 7-1 R emove tie wrap holding the Seat Rail pivot bushings. 7-2 P lace the Seat Rail Assembly under the Base Assembly. Base Assembly 7-3 Install hardware and tighten so the Seat Rail pivots freely.
Assembling Your Bowflex® Motivator® 2 Home Gym STEP 9 Parts: • Upper Lat Tower Assembly (from Step 8) • Base Assembly (from Step 7) Tool: • Hex Key (7/32”) Upper Lat Tower Assembly 9-1 Insert the Upper Lat Tower Assembly into the Lower Lat Tower. Washer 9-2 Install and completely tighten the hardware. Button Head Screw Hardware (1:1): Base Assembly Lower Lat Tower 6 Button Head Screws (3/8” X .
Assembling Your Bowflex® Motivator® 2 Home Gym STEP 11 Parts: • 210# Rod Box • Rod Box Mount Tool: • Phillips Head Screwdriver 11-1 L ay the 210# Rod Box onto one side. Place the Rod Box Mount onto the bottom of the Rod Box. 11-2 Install and completely tighten the hardware.
Assembling Your Bowflex® Motivator® 2 Home Gym STEP 13 Parts: • 4 Leg Extension Foam Rollers • 4 Leg Extension Tube End Plugs • 2 Leg Extension Roller Tubes • Base Assembly (from Step 12) Base Assembly Leg Extension Tube End Plugs Leg Extension 16 1/2”Roller Tubes 13-1 Insert the Leg Extension Roller Tubes through the Leg Extension Tubes. 13-2 S lide the Leg Extension Foam Rollers onto the Tubes. 13-3 P lug the Tube Ends with the Leg Extension Tube End Plugs.
Assembling Your Bowflex® Motivator® 2 Home Gym Connect the Cables – A Connect cables to Power Rod® unit, chest bar and hand grips: Rod Hooks Power Rods Parts: • 2 Hand Grips w/Ankle Cuffs Chest Bar A-1 Unwrap the Cables from the Chest Bar. Snap Hooks A-2 “Hook” the Rod Hooks to the Power Rod® unit. Hand Grips w/Ankle Cuff A-3 Connect the Hand Grips to the Snap Hooks.
Assembling Your Bowflex® Motivator® 2 Home Gym Connect the Cables – C Connect cables from chest bar to leg extension: C-1 Unwrap the Cables from the Leg Extension. C-2 C onnect the Snap Hooks from the Chest Bar to the Leg Extension Cables. Chest Bar Snap Hooks Bench Cushion Leg Extension Cable Base Platform Assembly Connect the Cables – D Connect cables from chest bar to leg press belt: Parts: • Leg Press Belt D-1 Remove the Bench Cushion.
This manual is written and designed by industry professionals. If you have any questions regarding your Bowflex® Motivator® 2 home gym or any instructions found in this manual, please call 1-800-NAUTILUS (1-800-628-8458) for assistance. ©2005. Nautilus Inc. All rights reserved. Nautilus, Inc., World Headquarters, 16400 S.E. Nautilus Drive, Vancouver, WA 98683. Bowflex, the Bowflex Logo, Motivator, and Power Rod are either registered trademarks or trademarks of Nautilus, Inc.
