Service manual

Electrical Layout
1. Top Black cable (speed sensor)
2. Middle Red wire (up elevation)
3. Middle Black wire (down elevation)
4. Middle White wire (elevation Com)
5. Blue wire (N/L2)
6. Brown Wire (AC/L1)
7. Bottom Left Black wire (A2 Motor)
8. Bottom Right Red wire (A1 Motor)
Lights
1. Top Left (PWM)
2. Top Middle (speed sensor)
3. Top Right (V_Console)
Lights next to Middle Red wire
1. Left (elevation up)
2. Right (elevation down)
Fuses
1. Middle Left ( 0.5 amp main board)
2. Middle Right ( 1. 5 amp AC – incline)
3. Gray Fuse under Blue and Brown wire
(15 amp DC power)
Plug and Switch configuration
Plug and switch wiring
configuration
1. Connects with N/(L2) On control board
2. Connects with AC/(L1) On control board
Service Manual
6