Owner`s manual

Troubleshooting Guide
PROBLEM CAUSE CORRECTION
Treadmill will not start Not plugged in Plug into three prong grounded outlet.
Safety pull pin not inserted. Insert safety pull pin.
Treadmill circuit breaker tripped. Reset circuit breaker.
Elevation not accurate Out of calibration. Re-calibrate unit.
Speed not accurate Out of calibration. Re-calibrate unit.
Set in wrong units. Change units.
Walking belt slips Walking belt loose. Adjust walking belt tension. (See page 27)
Walking belt not centered
Walking belt tension not centered
across the rear roller.
Adjust walking belt tension. (See page 27)
Heart rate not displayed
(using chest strap)
Transmitter not making good contact
with skin.
Moisten skin contact area on the chest strap, or
turn chest strap upside down.
Electromagnetic interference.
Turn off any television, microwave or computer
within 6 feet (2 meters) of treadmill.
Treadmill squeaks Pivot points need lubrication. Lubricate pivot points.
Treadmill will not fold up Incline not set to zero
Power up machine and set incline to zero. If
incline can not be set to zero, calibrate machine.
Locating The Circuit Breaker On Your Treadmill:
The breaker is near the front of the treadmill and near the power cord.
30
Taking Care of Your Treadmill