Owner`s manual

Folding, Transporting & Unfolding your Treadmill
This treadmill has a folding mechanism; you must stop operation while folding and transporting. Make sure the power is
off and the power cord is removed and unplugged before folding and transporting the treadmill.
To fold the treadmill:
1. Stop the Treadmill belt.
2. Bring Elevation to zero.
3. Turn off power.
4. Squeeze the release mechanism then lift the deck to fold up
the treadmill. Make sure the pin clicks into position and the
deck is secure before moving the treadmill.
To transport the treadmill:
1. After folding, as mentioned in step 4 of folding section, please
be sure deck is locked/engaged in up position.
2. Remove Power cord.
3. Pull backwards, holding the top of the deck, until the wheels
can move smoothly.
To unfold the treadmill:
Squeeze the release mechanism down and gently lower the deck until it sits on level ground. Make sure the pin clicks
into position and the deck is secure before using the treadmill.
NOTE: After initial assembly your Bowflex Treadmill must be calibrated before it can be
folded. See calibration instructions on page 26.
25
Taking Care of Your Treadmill