Info Sheet

ManualsBrandsBowers & Wilkins ManualsAudio Equipment2-way in-wall speaker system

Signature 7NT

The Signature 7NT is a true Kevlar woofer based audiophile in-wall monitor. The Aluminium baffle has very high rigidity, which with

the 7in cast frame improves bass speed and attack. The crossover contains polypropylene capacitors resulting in transparency

throughout the frequency range. The inverted drive unit configuration brings the Nautilus tube technology tweeter closer to ear

height and the speaker has a switch to allow the HF level to be adjusted. The speaker can be bi-wired via high quality gold plated

terminals.

See nothing, hear everything

Audiofile-standard in-wall monitor

Nautilus™ tube-loaded tweeter

EQ Switch

2-way in-wall speaker system

1x ø25mm (1 in) alumminium dome tweeter

1x ø180mm (7 in) woven Kevlar® cone mid/bass

-6dB at 35Hz and 50kHz

40Hz-25kHz ±3dB on reference axis

88dB spl (2.83V, 1m)

Ω

(minimum 3.6

Ω

)

3.5kHz

150W continuous into 8

Ω

on unclipped programme

371mm (14.6 in) x 225mm (10 in)

337mm (13.3 in) x 220mm (8.7 in)

98mm (3.8 in) from wall surface

3.0kg (6.6lb)

Semi-matt white suitable for customising or pre-painting

(paint mask included)

Pre-mount kit for new construction (PMK 800)

Back Box (BB W8)

Technical features

Description

Drive units

Frequency range

Frequency response

Sensitivity

Nominal impedance

Crossover frequency

Recommended

amplifier power

Frame size

Cut-out size

Min depth req

Net weight

Finish

Accessories

Technical Specification

Summary of content (2 pages)

PAGE 1
Signature 7NT See nothing, hear everything The Signature 7NT is a true Kevlar woofer based audiophile in-wall monitor. The Aluminium baffle has very high rigidity, which with the 7in cast frame improves bass speed and attack. The crossover contains polypropylene capacitors resulting in transparency throughout the frequency range. The inverted drive unit configuration brings the Nautilus tube technology tweeter closer to ear height and the speaker has a switch to allow the HF level to be adjusted.
PAGE 2
Signature 7NT Architectual and Engineering Specifications The loudspeaker system shall be of the mono-amped 2 way type comprising of a single flush mountable rectangular enclosure containing one 7in bass driver with woven Kevlar cone, one 1in tube loaded aluminium dome tweeter. Performance specifications of a typical production unit shall meet or exceed the following: Frequency response shall be 40 – 25kHz. Nominal impedance shall be 8 Ohm.