Manual

750 50 0002 03

3. After the measuring insert has been removed, the

flatness value (Delta = maximum - minimum) will be

stored and displayed in the buffer (DLT). A new

measurement can than be performed

As log as the measuring insert is in contact with the surface, the Min / Max or Delta mode can be

selected by pressing the

key. The corresponding values will be displayed.

6.6 Zero setting of the display

A zero setting of the display (for surface measurements or on

centerline distances) is made by pressing the Zero key.

6.7 Checking of squareness deviation

The checking of the squareness deviation includes 4 values

as shown on the displayed schema:

z Distance

⊥ Squareness deviation

∠ Inclination

— Rectilinearity

Squareness deviation checking is done as follows:

1. Lock the floating probe movement (chromium-plated

screw).

2. Insert the TRIMOS electronic probe with its support (1)

into the probe holder location bore and lock it using the

knob (2).

∠

⊥

—