User Manual

3. Battery Charging

Your Bowers & Wilkins Pi5 S2 ships with the battery partially charged & may be used immediately. For best

practice we recommend to fully charge the earphones before first use. Please allow up to 3 hours for full

charge. The earphones can be used while charging.

To charge the Pi5 S2 ear buds:

1. Place the Pi5 S2 ear buds in the charge case.

2. Close the charge case lid.

To charge the Pi5 S2 charge case with cable:

1. Please use the supplied USB charging cable and connect the USB plug to a USB wall charger or a

powered computer USB socket.

2. Then connect the USB-C end to the charge case USB-C socket.

Note: During charging, the charge case indicator will blink green. When fully charged, the indicator will

remain illuminated. The charge case can be charge with or without the ear buds being housed inside the

charge case.

To charge the Pi5 S2 charge case with a wireless charging station:

1. Place the charging case onto a wireless charging station.

2. Ensure that the rear of the charging case is on the charging station (with the case indicator facing up.

Note: During charging, the charge case indicator will blink green. When fully charged, the indicator will

remain illuminated.