Specifications

PPuullssaarr rraaddiioo ttrriiggggeerr ssyysstteemm
20 - Remote triggering | Pulsar Radio Trigger System
Whether you are triggering flash heads for
complicated lighting setups or cameras
for remote control nature shots or special
effects, this system is for you.
Each Pulsar unit can be either a transmitter or
receiver and is capable of sending or
receiving signals beyond 100m [333’].
Unlike Infrared triggering systems, the radio-
transmitted Pulsar operates around corners
and through walls.
The Pulsar has four separate channels,
enabling the photographer to isolate up to
four light sources or to combine them and fire
all of them at once without leaving the
camera.
Additionally, the Pulsar has a studio selector
switch, which provides isolation from other
Pulsar units using the same channel, and
allowing up to six different systems to
operate independently in the same space or
studio.
OOtthheerr PPuullssaarr ffeeaattuurreess iinncclluuddee::
• L
ong battery life up to 200 hours of
continuous use from two AAA batteries.
• Low voltage operation of just 3V, ideal for
use with digital cameras.
• Compact and lightweight design allows the
units to be mounted directly onto your
camera’s hot shoe or to your generator, or
monolights.
SSppeecciiffiiccaattiioonnss::
Length - 9
0mm [3
1
⁄2”]
Width - 49mm [2”]
Height - 44mm [1
3
⁄4”]
Weight - 122g [4.3oz]
BW5160 - Pulsar Twin Pack
BW5150 - Pulsar Single Unit
A clip-on platform is available allowing you to
clip the Pulsar anywhere that it is needed.
BW5155 - Pulsar Clip
Tx/Rx Select 
Channel Select 
External Power 
Sync. In 
 Test Flash
 LED Indicator
 PC Sync. Out
 Hot Shoe
 Studio Select
 Sync. Out
rreemmoottee ttrriiggggeerriinngg
21 - Remote Triggering | Wireless
GGeemmiinnii RR && PPrroo RReemmoottee CCoonnttrrooll
The pocket-sized Gemini Remote Control makes working with Gemini ‘R’ and ‘Pro’
monolights a breeze. Weighing in at just 34g this diminutive device allows precise
control of features such as power, test flash, modelling, sounder, photocell and
channel setting without ever leaving the camera position - up to seven meters (22’).
SSppeecciiffiiccaattiioonnss
Length: 9
5mm [3
6
⁄8”]
Width: 45mm [1
6
⁄8”]
Height: 10mm [
3
⁄8”]
Weight: 34g [1.2oz]
BW3960 Gemini R & Pro Remote Control.
PPuullssaarr RRaaddiioo TTrriiggggeerr CCaarrdd PPaacckk
Gemini Classic, R & Pro monolights can
become compatible with the Pulsar system by
using this unique upgrade pack.
Simply insert the Radio Trigger Card into the
slot on the back of the Gemini unit then fit the
antenna into the socket on the side and your
monolight is ready to receive signals from a
Pulsar unit mounted onto your camera.
Never be let down by unreliable sync cords or
connections again.
Order Code: BW5170
PPoocckkeettWWiizzaarrdd
®®
RRaaddiioo TTrriiggggeerr CCaarrdd PPaacckk
Bowens Radio-enabled Gemini monolights can
also become compatible with the popular
PocketWizard Radio Trigger System with this
upgrade pack.
After inserting the Radio Trigger Card and
antenna into the monolight the system will learn
the settings of your PocketWizard transmitter
and set itself to the same channel.
And as the card is integral to the monolight - no
more lost or forgotten receivers.
BW5180 433Mhz (Euro)
BW5185 344Mhz (USA)
IInntteeggrraatteedd rraaddiioo ttrriiggggeerriinngg..
Easy as one...
two... three...
oonnee..
Insert trigger card.
ttwwoo..
Attach antenna.
ffrreeee....!!
from sync cords.

 




Ready Sounder Channel Select
Photocell
Modelling Mode
Lamp Ready Indication
Increase
Decrease
Flash Test
Toggles On/Off Select 1-8 or all (O)
Toggles On/Off Power or Modelling level
Power or Modelling levelMax / Usr / Relative
Toggles On/Off Flashes the unit