User's Manual

 Interface
Device Interface Description
Fiber Optical interface 1*SC/APC optical interface for fiber connection.
LAN 4*GE Ethernet interface with RJ-45 connector,
Supports 10/100/1000-Base-T,half/full duplex and
flow control, auto negotiation or manual configuration
and supports MDI/MDIX auto-sensing
Phone 2*POTS interfaces with RJ-11 connector
Power 12V Power Input Interface
1* DC Jack for power input
Antenna 6*external antenna
 Technical Specification
Item Description
Dimension 220mm×160mm×55mm(Height×Width×Depth)
Rated Voltage 12V
Rated Current 2A
Operation Temperature 0ºC to 40ºC
Storage Temperature -20ºC to 65ºC
 Safety Instructions
Please read the safety instructions carefully before using the device.
1. Please keep the power adapter and cables and hands clean and dry to avoid the electric
shock and other dangers.
2. Please only use the standard power adapter provided in the packaging box, otherwise, the
device may work abnormally or even be damaged .
3. Please don’t open the cover of the device, especially when the device is powered on. It
can be dangerous to do so.
4. If do not use the device for a long time, please turn off the power.
5. If find the device is in an abnormal state,such as too hot,strange smell or smoke, please
power off the device quickly and feed back to the service provider.
6. Please keep the device away from any hot source and water.
7. Please don’t let anything cover the cooling holes of the device.
8. Observe local equipment handling regulations and protect the environment.
9. If need to clean the dust of the equipment, please cut off the power supply first and unplug
the relevant connecting cable,then use dry cloth to clean, do not use any liquid.