User's Manual

ManualsBrandsBowei Technology ManualsElectronicsXGSPON

WAG8F2W6XSXGSPONONTUserManual



 Package Lists

Item Quantity

WAG-8F2W6-XSONT Unit 1

Power Adapter 1

RJ-45 Ethernet Cable 1

User Manual 1

 ProductOverview

The WAG-8F2W6-XS is an ITU-T G.984 and ITU-T G.988 compliant ONT.The ONT provides

four GE ports, two POTS ports, Wi-Fi 802.11ax 2x2@2.4GHz & 802.11ax 4x4 @5GHz

concurrent, one RF interface,can efficiently deliver data services, video and voice services. Its

characteristics of high bandwidth and low delay can meet the needs of high-end home

users.And it supports desktop mounting or wall mounting.

Summary of content (7 pages)

PAGE 1
WAG8F2W6XS XGSPON ONT User Manual  Package Lists Item Quantity WAG-8F2W6-XSONT Unit 1 Power Adapter 1 RJ-45 Ethernet Cable 1 User Manual 1  ProductOverview The WAG-8F2W6-XS is an ITU-T G.984 and ITU-T G.988 compliant ONT.The ONT provides four GE ports, two POTS ports, Wi-Fi 802.11ax 2x2@2.4GHz & 802.11ax 4x4 @5GHz concurrent, one RF interface,can efficiently deliver data services, video and voice services.
PAGE 2
 Interface Device Interface Description Fiber Optical interface 1*SC/APC optical interface for fiber connection.
PAGE 3
 Connetion  Connect Ethernet If needed , connect LAN port of WAG-8F2W6-XS to PC via standard RJ-45 Ethernet Cable.Wireless devices can use the network name (SSID) & password to connect to Internet.  Connect Fiber Optical Cable Connect the fiber optical port of WAG-8F2W6-XS (at the bottom of the device) to XGSPON OLT via fiber optical cable.  Connect RJ-11 cable If needed, connect the phone port of WAG-8F2W6-XS to wired telephone via RJ-11 cable.
PAGE 4
 LED LED Color Power Green State Description Off The device is powered off. On The device is powered on. Off PON Green Flashing On Off LOS Red The devicehas not started the registration process. The device is registering or upgrading. The devicehas completed the registration process. The received XGSPON optical power is normal. The received XGSPON optical power is Flashing lower than the sensitivity of the optical receiver. Off Internet The device has no Ethernet connection.
PAGE 5
LED Color Green WPS State Description Flashing Data is being transmitted. On The WI-FI interface isenabled. Off WPS is disabled. Flashing The device is performing code matching. On Code matching successful.  Buttons Button Function Power Button Power on and off the WAG-8F2W6-XS device. WPS Set the WPS process. Reset Reset the WAG-8F2W6-XS device. This device complies with Part 15 of the FCC Rules.
PAGE 6
followingmeasures: ‐‐Reorient or relocate the receiving antenna. ‐‐Increase the separation between the equipment and receiver. ‐‐Connect the equipment into an outlet on a circuit different. from that to which the receiver is connected. ‐‐Consult the dealer or an experienced radio/TV technician for help.
PAGE 7
se conformer à l'innovation, la science et le développement économique Les RSS du Canada exemptes de licence. Leur fonctionnement suivant deux conditions: 1) cet appareil ne peut pas causer d'interférences et 2) ce dispositif doit accepter toute interférence, y compris peut provoquer le fonctionnement indésirable de l'appareil.