User's Manual

 Buttons
Button Function
Power Button Power on and off the WAG-0F2W device.
LED Button LED ON/OFF button, press to turn all LEDs ON/OFF.
WiFi2.4G WiFi 2.4G ON/OFF button, press to enable/ disable 2.4G
Wifi functions.
WiFi5G
WiFi 5G ON/OFF button, press to enable/ disable 5G Wifi
functions.
Reset Reset the WAG-0F2W device.
 Wireless Configuration
Wireless CountryRegion is 0(US).
 Logging into the Web Page
 Management IP address: 192.168.1.1, Network Mask: 255.255.255.0
 Username/Password: admin/admin
 HTTP web address: https://192.168.1.1
Step 1: Use the Ethernet cable to connect LAN port 1 of WAG-0F2W to a PC.
Step 2: Set up the PC to obtain an IP address automatically (DHCP) and make sure the IP
address of the PC is in the same subnet as the management IP address of WAG-0F2W.
Step 3: Enter https://192.168.1.1 in the address bar of the web browser to log into the local
web page.
Step 4: On the login screen, enter the username(admin) and password(admin), and then
click Login. After the authentication is successful, the management web page is displayed.