User's Manual

ManualsBrandsBowei Technology ManualsElectronics10G ONT

WAG-0F2W XGS-PON ONT User Manual

 Package Lists

Item Quantity

0F2WW GPON ONT Unit 1

Power Adapter 1

RJ-45 Ethernet Cable 1

User Manual 1

 Product Overview

The WAG-0F2W is an ITU-T G.984 and ITU-T G.988 compliant ONT. The ONT provides four

GE ports, two POTS ports, Wi-Fi 802.11ax 2x2@2.4GHz & 802.11ax 4x4 @5GHz concurrent,

two USB ports. Its characteristics of high bandwidth and low delay can meet the needs of

high-end home users. And it supports desktop mounting or wall mounting.

 Interface

Device Interface Description

Fiber Optical interface 1*SC/APC optical interface for fiber connection.

Supports GPON(Transmitting : 1270 nm(PON) ,

Receiving : 1577 nm (PON) )

LAN 4*GE Ethernet interface with RJ-45 connector,

Supports 10/100/1000-Base-T, half/full duplex and

flow control, auto negotiation or manual configuration

Summary of content (7 pages)

PAGE 1
WAG-0F2W XGS-PON ONT User Manual Package Lists Item Quantity 0F2WW GPON ONT Unit 1 Power Adapter 1 RJ-45 Ethernet Cable 1 User Manual 1 Product Overview The WAG-0F2W is an ITU-T G.984 and ITU-T G.988 compliant ONT. The ONT provides four GE ports, two POTS ports, Wi-Fi 802.11ax 2x2@2.4GHz & 802.11ax 4x4 @5GHz concurrent, two USB ports. Its characteristics of high bandwidth and low delay can meet the needs of high-end home users. And it supports desktop mounting or wall mounting.
PAGE 2
Device Interface Description and supports MDI/MDIX auto-sensing Phone USB 2*POTS interfaces with RJ-11 connector 2*USB port, 5V-1.
PAGE 3
Connect Fiber Optical Cable Connect the fiber optical port of WAG-0F2W (at the bottom of the device) to GPON OLT via fiber optical cable. Connect RJ-11 cable If needed, connect the phone port of WAG-0F2W to wired telephone via RJ-11 cable. Connect USB storage device If needed, connect the USB storage device with USB port.
PAGE 4
LED Color State Off PON Green Flashing On Off LOS Red Description The device has not started the registration process. The device is registering or upgrading. The device has completed the registration process. The received GPON optical power is normal. The received GPON optical power is Flashing lower than the sensitivity of the optical receiver. Off Internet The device has no Ethernet connection.
PAGE 5
Buttons Button Function Power Button Power on and off the WAG-0F2W device. LED Button LED ON/OFF button, press to turn all LEDs ON/OFF. WiFi2.4G WiFi 2.4G ON/OFF button, press to enable/ disable 2.4G Wifi functions. WiFi5G WiFi 5G ON/OFF button, press to enable/ disable 5G Wifi functions. Reset Reset the WAG-0F2W device. Wireless Configuration Wireless CountryRegion is 0(US). Logging into the Web Page Management IP address: 192.168.1.1, Network Mask: 255.255.255.
PAGE 6
NOTE: If you do not perform any operation within 5 minutes after login, you will be forced to exit the webpage automatically and required to re-log into the web page. The login interface will be locked for 1 minute if a wrong user name or password is entered three times consecutively. DO NOT connect the Ethernet cable to port(s) that are bound to the OTHER bridge service. A PC won’t be able to obtain an IP address via DHCP nor access the 0F2WW web page.
PAGE 7
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.