Datasheet

Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details.
IEC EIA
Dimensions
Dimension Description Mark Mark Dimensions Tolerance
Carrier tape width WW
Hold down tape width: all others W
0
W
4
min.
Hold down tape No protrusion
Top distance between tape edges W
2
W
6
max.
Sprocket hole position W
1
W
5
Sprocket hole diameter D
0
D
0
Abscissa to plane (straight lead) HH
Abscissa to plane (kinked lead) H
0
H
0
Abscissa to top (straight lead) H
1
H
1
max.
Abscissa to top (kinked lead) H
1
H
1
max.
Overall width w/lead protrusion (straight lead) C
1
max.
Overall width w/lead protrusion (kinked lead) C
1
max.
Overall width w/o lead protrusion (straight lead) C
2
max.
Overall width w/o lead protrusion (kinked lead) C
2
max.
Lead protrusion I
1
L
1
max.
Protrusion of cutout LL max.
Protrusion beyond hold tape I
2
I
2
Not specified
Sprocket hole pitch P
0
P
0
Pitch tolerance 20 consecutive ±1
Device pitch: MF-R005–MF-R160, MF-R/90 & MF-RX/72
Device pitch: MF-R185–MF-R400,
MF-RX110–MF-RX375
Tape thickness tt max.
Tape thickness with splice: MF-R010–MF-R160 t
1
max.
Tape thickness with splice: MF-R250–MF-R1100
MF-RX110–MF-RX375 & MF-R/90 t
1
max.
Splice sprocket hole alignment 0
Body lateral deviation ∆h ∆h 0
Body tape plane deviation ∆p ∆p 0
Lead spacing FF
Reel width wW
2
max.
Reel diameter da max.
Space between flanges less device W
1
h
MF-R, MF-RX, MF-R/90, MF-RX/72 & MF-RX/250 Series
Tape and Reel Specifications
18
(.709)
-0.5/+1.0
(-0.02/+.039)
9
(.354)
-0.5/+0.75
(-0.02/+0.03)
4
(.157)
±0.2
(±.0078)
18.5
(.728)
±3.0
(±.118)
16
(.63)
32.2
(1.268)
38.0
(1.496)
43.2
(1.7)
55.0
(2.165)
42.5
(1.673)
54.0
(2.126)
1.0
(.039)
11
(.433)
±0.5
(±.02)
12.7
(0.5)
12.7
(0.5)
25.4
(1.0)
0.9
(.035)
1.5
(.059)
2.3
(.091)
5.08
(0.2)
56
(2.205)
370
(14.57)
±0.3
(±.012)
±0.3
(±.012)
±1.0
(±.039)
±0.3
(±.021)
±0.2
(±.008)
4.75
(.187)
±3.25
(±.128)
11
(.433)
3
(.118)
DIMENSIONS =
MM
(INCHES)