Owner`s manual

The level of iron discrimination you selected appears in the

TARGET readout, and R appears under your customized

selections as shown in the following diagram.

Example of Time Ranger™ set for

IR 4 iron discrimination with

customized selections for pull tab,

screw cap and zinc penny rejection.

▲ To adjust sensitivity in DISCRIMINATION mode

After you select your PRESET or customized targets, you can adjust the

detector’s sensitivity. The default setting is 5 on the SENSITIVITY dial.

Press the LOW (-) or HIGH (+) SENSITIVITY touch pads on the control

panel to adjust the detector’s sensitivity while monitoring your

adjustment on the SENSITIVITY dial.

The arrow on the dial in the LCD display points to the selected

setting.

▲ To listen to tones in DISCRIMINATION mode

DISCRIMINATION mode (including PRESET and SNIFF mode)

makes use of the Audio Target Identification (ATI) feature that

identifies objects using three different tones or no response at all, as

shown in the following diagram.

NOTE:

Three-tone Audio Target Identification is disabled in the

ALL METAL mode.

Copper, Silver &

Bronze

Old & New

Pull Tabs

Gold & Nickel

Iron & Steel

RESPONSE

LOW

TONE

MEDIUM

TONE

HIGH

TONE