Owner`s manual

10
TARGET Readout
TARGET Meaning Description
Ac Accept Appears when you press + using the +/-
TARGET touch pads. Indicates that the
target has been accepted.
LCD Display
The LCD display consists of the TARGET readout and both adjustment
and indicator dials. Arrows also appear at the top of the LCD display,
pointing to the probable target detected in the Probable Target ID fields.
▲ TARGET Readout
The TARGET readout displays general detector operating information. It
appears in the top center of the LCD display between the SENSITIVITY
and DEPTH dials. The following table lists the general operating
abbreviations that appear under TARGET, their meaning, and a brief
description of each.
Touch pads (continued)
LOW and HIGH are used to adjust the detector’s
sensitivity in DISCRIMINATION mode. LOW and
HIGH are used to adjust the detector’s AUDIO
LEVEL in ALL METAL mode.
gb Ground
Balance
Indicates the unit has taken ground
measurements and averaged them.
rY Discriminate Mode Mode Indicates the detector is ready for
operation in ALL METAL mode.
288 ID Numbers
0-299
Indicate air and ground measurements
and target value range for more detailed
target identification.
Ar Air Value Indicates the detector is testing the air.