OPERATING MANUAL The Guardian® Hand Held Security Metal Detector
OPERATOR DETECTION ALERTS INTERFERENCE ELIMINATION FEATURES • Audio Alert – High Pitch Sound • Vibration Alert - Silent Operation • LED Target Indicator - Red • 3 Operating Frequency Selections • Minimize electromagnetic interference from other devices COMFORT GRIP MOMENTARY LOW OPERATION • Minimizes Interference from environmental metal objects Wrist Strap POWER SUPPLY • Requires (1) 9-Volt battery (not included) • Low Battery LED indicator OPERATING FREQUENCY 7.1 kHz DETECTOR FEATURES 1.
b) Large environmental metal objects, such as the metal reinforcing bars in floors, will not be detected beyond a range of several inches. Upon release of the "Momentary Low" switch, the detector will return to Normal Operation. 4. Silent Operation Position the Silent/Audio switch in the "Silent/Vibrate" position and: a) The detector will NOT emit an audible tone upon the detection of metal objects.
First Time Operation To Operate the Detector, 1) Install the Batteries a. Use a 9-volt ALKALINE battery only (battery not included) b. Install battery with correct polarity (align "+" on detector housing with "+" on battery) c. The battery cover opens and closes with a coin or screwdriver 2) Set the On switch to "ON" "ON" is the middle position 3) Set the Silent/Audio switch to "AUDIO" 4) Sweep the Detector over the target area.
Batteries Use 9-Volt ALKALINE battery only (battery not included) Low Battery Alert The Yellow LED indicator light will illuminate and remain illuminated before the batteries are discharged to the point at which the detector has lost any of its metal detecting range. In order to guarantee maximum detection at all times, replace battery as soon as yellow light illuminates. The detector will continue to operate, at a lower sensitivity, when the Low Battery Indicator is illuminated.
Power Switch with Momentary Low The Power switch has 2 "ON" positions and a forward "OFF" position. The detector is OFF with the switch in the "UP" position The detector is ON with the switch in the "MIDDLE" position Momentary Low OFF The detector is in MOMENTARY LOW operation with the switch ON held in the "DOWN" position.
Body Scanning for the Detection of Metal Objects Always test the detector before operation. Sweep the detector across a known metal object, and verify detection with audio, vibratory and visual feedback. Motion is Required: The metal detector must be IN MOTION, sweeping across the target area, to detect the presence of metal. The subject should stand upright, with arms and legs extended. Sweep the detector over the subject, with a smooth, even motion, about one inch from the body.
Limited Ninety-Day Warranty This product is warranted by First Texas Products L.L.C. against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from First Texas Products L.L.C. company-owned stores and authorized First Texas Products L.L.C. franchisees and dealers. EXCEPT AS PROVIDED HEREIN, First Texas Products L.L.C.
