Instructions / Assembly

BATTERIES
Use ALKALINE batteries only.
Follow these steps to install the batteries.
●
1 Carefully remove the battery compartment door by pressing
the release clip on the right side of the door.
●
2 Snap one battery on to each of the terminals and place the
batteries inside the compartment.
The battery compartment is a tight fit. Insert batteries
with the terminals facing inward. See illustration.
●
3 Replace the compartment door by first inserting the hinge on
the side opposite of the release clip.
●
4 Then, press down firmly on the clip side until the battery door
snaps into place.
Batteries
terminals
facing inwards
Release
Clip
5