User`s guide

Clock
The clock menu (shown below) contains seven lines that you can modify:
Date 1, 1995
Time 08:00:00 AM
Display Off
Type 12
Column 48
Alarm Set 12:00 PM
Tone Off
Jan.
The following table describes the values you can set in the various fields:
This field: Lets you:
Date Set the current date. The host can also set the date.
Time Set the current time. The host can also set the time.
Display Choose whether only the Time, only the Date, or both the Time and the Date
appear on the top status line. You can also turn off the Date/Time display. The
host can set the date display.
Type Choose whether the clock uses a 12- or a 24-hour display.
Column Set the column (36–99) in which the date/time appears.
Alarm Set Choose the time when an alarm (a 1-2 second bell tone) sounds.
Tone Set when the alarm should sound: every hour, on the Alarm setting only, or both
on the Alarm setting and hourly. You can also turn off the alarm.
Note:
The terminal resets the clock to 08:00 AM at power-up. Also, due to hardware limitations, the clock may drift by 15 seconds per day. We recommend setting the
terminal’s time as part of the system login process.
The following table shows the keys you can use to change the values of the fields:
Press this key: To do this:
Å (right arrow)
Highlight the previous field
Æ (left arrow)
Highlight the next field
Ç (up arrow)
Highlight the previous line
È (down arrow)
Highlight the next line
Spacebar Choose the previous option for the highlighted field
Shift+spacebar Choose the next option for the highlighted field
Enter (on the numeric keypad) Revert to the default setting for the current field
Esc Save your changes and close the window
34