User`s guide

Desk Accessories 42
Clock
The clock menu (shown below) contains seven lines which can be modified.
Use the following keys to make changes:
Up- or down-arrow keys - select a line. The line is highlighted.
Left- or right-arrow keys - select a field on the chosen line. The selected field is now highlighted.
Spacebar- move "up" through options available for this field.
Shift-Spacebar - move "down" the options.
Enter (kpd) - revert to the default setting for the current field.
Esc - exit clock and save settings.
Date Jan 1, 1993
time
08:00:00 AM
Display Off
Type 12
Column
48
Alarm set 12:00 PM
Tone Off
Clock
The clock is reseUo08:00 am at power up. Due to the limitations of the hardware, the clock may drift by 15
seconds per day. We recommend setting the terminal's time as part of the system log-in process.
Date - use the left or right arrow keys to highlight each field of the date (month, day, and year). Then use the
Spacebar or Shift-Spacebar to cycle through the settings. The date can also be set by the host.
Time - use the procedure described for Date above to set the hour, minutes, or seconds.
Display - indicate whether only Time, only Date, or both the Time and the Date are displayed on the top status
line. Display of Time /Date can also be turned Off. The date display can also be set by the host.
Type - select whether the clock functions on a 12-hour or 24-hour basis.
Column - set the column (36-99) in which the date/time will display (as enabled by Display above).
Alarm Set - time at which an alarm (a 1-2 second bell tone) should sound.
Tone - how alarm tone(s) should be activated: every Hour, on the Alarm setting only, or both on the Alarm
setting and Hourly. The alarm tone can also be turned off.