User`s guide

18
Step 12 - Save Parameters
Finally, remember to save your Setup parameters in permanent memory, so that they can be recovered if the
terminal is powered down. When you exit the Setup menu, the prompt "Save all? (YIN)" flashes. To save
parameters, press "Y." Another way to save parameters is to perform a "Save Terminal" operation, while in the
Exec (Prt Sc) menu of Setup. Both methods will save the parameters in both sessions, as well as those that are
common to both.
Remember to save your Setup settings after the entire
installation process.
Step 13 - Establish Communications
1. Your installation is now complete. By pressing the Return or Enter key, you should be able to communicate
with the host computer(s). The printer should respond to the local print command, Shift-Clrl-. (kpd); use the
period on the numeric keypad.
2. If for some reason, your installation was not successful, make sure your physical connections are secure,
that the communications protocol settings match your devices and that the Setup selections are chosen to
provide a
proper interface between the terminal and your devices.
3. If you continue to have problems installing the terminal, call your local dealer for technical support.