User`s guide

58 Desk Accessories
Use the following keys to make changes:
þ Up- or down-arrow keys – select a line. The line is
highlighted.
þ Left- or right-arrow keys – select a field on the chosen line.
The selected field is now highlighted.
þ Spacebar – move “up” through options available for this
field.
þ Shift-Spacebar – move “down” the options.
þ Enter (num) – revert to the default setting for the current
field.
þ Esc – exit clock and save settings.
Each of the seven fields is described below:
The clock is reset to 08:00 AM at power-up. Due to hardware
limitations, the clock may drift by 15 seconds per day. We
recommend setting the terminal’s time as part of the system
login process.
Date – use the left or right arrow keys to highlight each field of
the date (month, day, and year). Then, use the Spacebar or press
Shift-Spacebar to cycle through the settings. The date can also
be set by the host.
Time – use the procedure described for Date above to set the
hour, minutes, or seconds.
Display – indicate whether only Time, only Date, or both the
Time and the Date are displayed on the top status line. Display
of Time/Date can also be turned Off. The date display can also
be set by the host.
Type – select whether the clock functions on a 12- or 24-hour
basis.
Column – set the column (36–99) in which the date/time will
display (as enabled by Display above).
Alarm Set – time at which an alarm (a 1–2 second bell tone)
should sound.