User`s guide

64 Setup
Edit Fields
Setup uses overwrite mode in text editing fields. That is, the
cursor keys cannot be used to move to a location in the text to
insert characters. Upon entry to a text field, the cursor is placed
at the last text location. Use the following keystrokes:
þ Backspace – move cursor left by deleting that character.
þ Shift-Backspace – reset the field to its default value.
þ Alphanumeric keys – enter text in the normal, shifted, or
control state. To generate a control character (00h-1Fh) add
40h and use Ctrl with the character in the new position
(40h-5Fh). For example, to insert CR-LF (0Dh, 0Ah) codes,
press Ctrl-M, Ctrl-J (4Dh, 4Ah). The compose and meta
functions can also be used to generate 8-bit characters.
Glossary of Terms
Some of the terms that are used in the Exec (PrtSc) menu are
defined below.
Terminal Parameters
Terminal parameters includes emulation parameters (defined
later) and non-emulation parameters that affect the terminal
globally without regard to the emulation. The non-emulation
parameters and their defaults are listed below:
þ Setup Parameters: Bell Volume (6), Screen Saver (5 min),
Overscan Borders (on), Language (U.S.), Keyclick (on),
EIA(Aux) Baud Rate (9600), EIA (Aux) Data Format (8/1/N), EIA
(Aux) Parity Check (off), EIA(Aux) Rcv Prtcl (Xon-Xoff/XPC), EIA
(Aux) Xmit Prtcl (none), EIA (Aux) Break (250 ms), EIA (Aux)
Xmit Pace (baud), EIA (Aux) Disconnect (2 sec), EIA (Aux)
Modem Control (off), Emulation Display (full), Refresh Rate (70
Hz), Bright Video (off), Enhanced Attributes (on), Caps Lock
(Toggle), Num Lock (Toggle), Key Repeat (On), Speed (fast).
þ Desk Accessory Parameters: Clock Display (off), Clock Type (12
hour), Clock Location (column 48), Date, Time (not saved) ,