User`s guide

EXECUTE: Prnt Scrn 63
EXECUTE: Prnt Scrn
All of the parameters in this menu are action parameters.
Terminal parameters affect all settings, including the emulation.
Emulation choices affect only settings that relate to the chosen
emulation.
Save Terminal: Save all settings in non-volatile (permanent)
memory, including those associated with the emulation selected.
Reset Terminal: All terminal parameters are initialized. It also
performs reset pages and default modes.
Recall Terminal: Revert to all terminal and emulation settings that
were saved in nonvolatile memory. A “Reset Terminal” is also
performed. This is referred to as a hard reset and is equivalent to
turning the terminal off and back on.
Default Terminal: Load all defaults for the terminal and emulation,
including the emulation. A “Reset Terminal” is also performed.
Save Emulation: Save all the settings associated with the chosen
emulation.
Reset Emulation: Initialize all emulation settings. This is also
referred to as a “Soft-Reset.” Perform page-resets and default
modes. “Mode” specifies the parameters used by a emulation
which are not selectable through Setup such as Insert-Mode,
Split-Screen, and Graphics-Mode.
Recall Emulation: Load the previously saved settings associated with
the chosen emulation. A “Reset Emulation” is also performed.
Default Emulation: Load all defaults associated with the emulation
selected.
Reset Ports: Clear the transmit buffers for the host and printer
port, and receive buffer for the host port. Unlocks the keyboard
and clears its buffer data.
Clear Screen: Clear the screen and the entire page.
Default Emulation UDKS: Set the contents of all the function and edit
keys associated with the chosen emulation to their factory
default states.