User`s guide

PROGRAM: F12 61
Label: A label of up to 7 characters can be entered for function
keys in ASCII emulations only. See “Display NV Labels” in the
Emulation section.
þ <Backspace> – delete
þ <Shift> <Back> – default field
Key: Select the key to be programmed. The keys that are listed as
choices depend upon the Program parameter as shown below:
þ When Program = F/Key or Sh-F/Key, the choices are
[F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12].
þ When Program = Edit Key or Sh-Edit Key, the choices are
[Tab, Esc, Backspace, Delete, Return, Home, ↑, ↓, ←, →, EnterKpd, Insert,
PageDown, PageUp, End, and Print].
When a PC style keyboard is attached, the following choices
apply:
þ When Program = F/Key or Sh-F/Key, the choices are [F1, F2, F3,
F4, F5, F6, F7, F8, F9, F10, F11, F12].
þ When Program = Edit Key or Sh-Edit Key, the choices are [{Tab,
<X], Select, Return, ↑, ↓, ←, →, Enter, Next, Screen, Remove, PF1, PF2, PF3,
PF4].].
When an ANSI keyboard is attached, the choices are as
follows:
þ When Program = F/Key or Sh-F/Key, the choices are [F1, F2, F3,
F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, Help, Do, F17, F18, F19, F20]].
þ When Program = Edit Key or Sh-Edit key, the choices are [Home,
Esc, Backspace, Delete, Return, Home, ↑, ↓, ←, →, EnterKpd, Insert, PageDown,
PageUp, End, and Print].
þ To program an ESC (escape) character into the key text,
press Ctrl-[.
þ To program a DEL character into the text field, press
Ctrl-Shift-* (alphanumeric keypad).
þ To program a carriage return or line feed into the key text
field, press Ctrl-M or Ctrl-J, respectively.